167 Results for : llu

  • Thumbnail
    Enduro Bearings ABEC3 6904 2RS Bearing - Steuersätze
    The ABEC3 6904 2RS raises the bar for military standard, high precision bearings. Some of the finest cycling components come standard with this bearing, featuring hardened chromium steel races, balls, and tough riveted steel retainers, for a durable and perfect low-cost performance upgrade. Technologies: 2RS: Literally means the bearing has Two Rubber Seals. There are many types of seals. On most other bearings 2RS means that the seal is made from rubber and has one sealing lip rubbing on any flat part of the inner race. Enduro’s seals are usually either LLU (usually the MAX type bearings) or LLB (better for hubs). Mobile HP 222: This grease is another high pressure grease for maximum protection and constant lubrication. This synthetic grease holds up under all conditions and will not break down.
    • Shop: Wiggle DACH
    • Price: 8.00 EUR excl. shipping
  • Thumbnail
    HAZET Zündmodul-Abzieher 1849-11
    Eigenschaften:Anwendung:Zum Abziehen bzw. Aufstecken von ZündmodulenErmöglicht das gleichmäßige Abziehen des Zündmoduls (somit entfällt das Hebeln und Knippen mit nicht geeigneten Werkzeugen, die Beschädigungen am Zündmodul verursachen können)An OPEL 3- und 4- Zylinder Benzin-Einspritzmotoren 1,0 1,2 1,4 1,6 1,8 2,0 2,2 l Motoren sowie FIAT Croma 1,8 l ALFA 159 1,8 lVerwendung paarweise empfohlenFür CHEVROLET Aveo CruzeOPEL/VAUXHALL Adam Agila-B Astra-J Cascada Combo Corsa-D Meriva-B Mokka Zafira TourerMotoren: 1,0: A10XEP (LDB), 1,2: A12XEL (LWD) A12XER (LDC), 1,4: A14XEL (L2Z) A14XER (LDD) LDU1,4 (T): A14NEL (LUH) A14NET (LUJ) Twinport / ecoFLEX MotorenOPEL 3- bzw. 4-Zylinder Benzin-Einspritzmotoren z.B. bei OPEL Agila-A Astra-F Astra-G Astra-H Astra-J Calibra Combo Corsa-B Corsa-C Corsa-D Frontera-A Frontera-B Insignia Meriva-A Meriva-B Omega-B Signum Tigra-A Tigra-B Vectra-B Vectra-C Zafira-A Zafira-BMotorcodes: 20LEH 2HO A10XEP A14NEL A14NET A14XER A16LET A16XER A18XER C22SEL LDD LDE LLU LUH LUJ X14NZ X14SZ X14XE X16SZR X16XE X16XEL X18XE X20SE X20XEV X22SE X22XE Y22SE Z10XEP Z12XE Z12XEP Z14XE Z14XEL Z14XEP Z16LEL Z16LER Z16LET Z16XE Z16XER Z16YNG Z18XE Z18XER Z20LERT-Griff aus KunststoffOberfläche: verchromtGesamtlänge: 85 mmLänge l1: 50 mm
    • Shop: Contorion
    • Price: 28.86 EUR excl. shipping
  • Thumbnail
    Nukeproof Mega 297 Alloy Frame - Grey - Rahmen - Full Suspension MTB
    Specifically designed for the rigours of enduro racing, this full-suspension mountain bike (MTB) frame features a hydroformed and triple-butted aluminium build for the best balance of strength, durability and performance. Nukeproof has also equipped this model with a RockShox Super Deluxe Ultimate RCT rear shock for smooth and dependable rear end suspension performance as you race across demanding terrain conditions. Thanks to its race-ready geometry that includes internal cable routing, this version delivers a hassle-free, clean finish. One final highlight is its 148x12mm Boost rear hub spacing that increases stiffness and handling as you charge from trail to trail. For over 12 years, Nukeproof's best-selling model; the Mega has been racking up awards on Enduro stages and in the press around the world. With four Enduro World Series titles to its name, the Mega has become an icon that is synonymous with racing. Since 2009 the Nukeproof Mega has been on a constant development to meet the demands of Nukeproof's riders and customers alike. As a result, the Mega Alloy V4 frame is available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel set ups, with each frame design tailored around each wheel size. To optimise the strength and weight, the Mega is constructed fully out of T6061-T6 aluminium including all forged parts. After winning four Enduro World Series Titles in three years the V4 design is an evolution of Nukeproof's ultimate enduro bike. At the heart of the frame is the brand's revised suspension Kinematic, designed to be more subtle off the top, whilst remaining progressive and predictable. Anti-Squat is used to create an effective pedalling bike that can be thrashed through technical terrain. The useable SAG range is also widened to allow riders to tune the suspension to the trails. Other key features include: ·        All new aluminium chassis ·        Designed and improved suspension kinematics ·        All new geometry ·        Optimised sizing/fit - Small to Large ·        SRAM UDH ·        Now fits a 750ml water bottle inside the main front triangle! The Mega frame is optimised around the rider and weight distribution. The geometry features dynamic saddle offset. Seat angles are optimised for each frame size and the seat tube itself is designed to take a longer dropper post if required.   Features: Material: Hydroformed 6061-T6 Triple-Butted Aluminium Fork Travel: 170mm Axle to Crown: 582mm Fork Offset: 42mm Rear Travel: 165mm Wheels Size: Front 29”/Rear 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: S/M/L Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Mega V4 297 Alloy, 165mm Travel, custom triple butted hydro-formed tube set Internal cable routing ISCG05 mount Enduro Bearings Threaded 73mm BB Boost 148mm rear axle spacing 3D contoured Rubber frame protection Shock: RockShox Super Deluxe Ultimate RCT, Custom LIN L1 HOTDOG S320 tune, 230x62.5mm, Bearing End, 2 bottomless tokens fitted Headset: Nukeproof, 44-56 IITS Weight: 3.87Kgs/8.53lbs (Medium)
    • Shop: Wiggle DACH
    • Price: 2199.99 EUR excl. shipping
  • Thumbnail
    Nukeproof Mega 297 Alloy Frame - Grey - Rahmen - Full Suspension MTB
    Specifically designed for the rigours of enduro racing, this full-suspension mountain bike (MTB) frame features a hydroformed and triple-butted aluminium build for the best balance of strength, durability and performance. Nukeproof has also equipped this model with a RockShox Super Deluxe Ultimate RCT rear shock for smooth and dependable rear end suspension performance as you race across demanding terrain conditions. Thanks to its race-ready geometry that includes internal cable routing, this version delivers a hassle-free, clean finish. One final highlight is its 148x12mm Boost rear hub spacing that increases stiffness and handling as you charge from trail to trail. For over 12 years, Nukeproof's best-selling model; the Mega has been racking up awards on Enduro stages and in the press around the world. With four Enduro World Series titles to its name, the Mega has become an icon that is synonymous with racing. Since 2009 the Nukeproof Mega has been on a constant development to meet the demands of Nukeproof's riders and customers alike. As a result, the Mega Alloy V4 frame is available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel set ups, with each frame design tailored around each wheel size. To optimise the strength and weight, the Mega is constructed fully out of T6061-T6 aluminium including all forged parts. After winning four Enduro World Series Titles in three years the V4 design is an evolution of Nukeproof's ultimate enduro bike. At the heart of the frame is the brand's revised suspension Kinematic, designed to be more subtle off the top, whilst remaining progressive and predictable. Anti-Squat is used to create an effective pedalling bike that can be thrashed through technical terrain. The useable SAG range is also widened to allow riders to tune the suspension to the trails. Other key features include: ·        All new aluminium chassis ·        Designed and improved suspension kinematics ·        All new geometry ·        Optimised sizing/fit - Small to Large ·        SRAM UDH ·        Now fits a 750ml water bottle inside the main front triangle! The Mega frame is optimised around the rider and weight distribution. The geometry features dynamic saddle offset. Seat angles are optimised for each frame size and the seat tube itself is designed to take a longer dropper post if required.   Features: Material: Hydroformed 6061-T6 Triple-Butted Aluminium Fork Travel: 170mm Axle to Crown: 582mm Fork Offset: 42mm Rear Travel: 165mm Wheels Size: Front 29”/Rear 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: S/M/L Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Mega V4 297 Alloy, 165mm Travel, custom triple butted hydro-formed tube set Internal cable routing ISCG05 mount Enduro Bearings Threaded 73mm BB Boost 148mm rear axle spacing 3D contoured Rubber frame protection Shock: RockShox Super Deluxe Ultimate RCT, Custom LIN L1 HOTDOG S320 tune, 230x62.5mm, Bearing End, 2 bottomless tokens fitted Headset: Nukeproof, 44-56 IITS Weight: 3.87Kgs/8.53lbs (Medium)
    • Shop: Wiggle DACH
    • Price: 2199.99 EUR excl. shipping
  • Thumbnail
    Nukeproof Mega 297 Alloy Frame - Grey - Rahmen - Full Suspension MTB
    Specifically designed for the rigours of enduro racing, this full-suspension mountain bike (MTB) frame features a hydroformed and triple-butted aluminium build for the best balance of strength, durability and performance. Nukeproof has also equipped this model with a RockShox Super Deluxe Ultimate RCT rear shock for smooth and dependable rear end suspension performance as you race across demanding terrain conditions. Thanks to its race-ready geometry that includes internal cable routing, this version delivers a hassle-free, clean finish. One final highlight is its 148x12mm Boost rear hub spacing that increases stiffness and handling as you charge from trail to trail. For over 12 years, Nukeproof's best-selling model; the Mega has been racking up awards on Enduro stages and in the press around the world. With four Enduro World Series titles to its name, the Mega has become an icon that is synonymous with racing. Since 2009 the Nukeproof Mega has been on a constant development to meet the demands of Nukeproof's riders and customers alike. As a result, the Mega Alloy V4 frame is available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel set ups, with each frame design tailored around each wheel size. To optimise the strength and weight, the Mega is constructed fully out of T6061-T6 aluminium including all forged parts. After winning four Enduro World Series Titles in three years the V4 design is an evolution of Nukeproof's ultimate enduro bike. At the heart of the frame is the brand's revised suspension Kinematic, designed to be more subtle off the top, whilst remaining progressive and predictable. Anti-Squat is used to create an effective pedalling bike that can be thrashed through technical terrain. The useable SAG range is also widened to allow riders to tune the suspension to the trails. Other key features include: ·        All new aluminium chassis ·        Designed and improved suspension kinematics ·        All new geometry ·        Optimised sizing/fit - Small to Large ·        SRAM UDH ·        Now fits a 750ml water bottle inside the main front triangle! The Mega frame is optimised around the rider and weight distribution. The geometry features dynamic saddle offset. Seat angles are optimised for each frame size and the seat tube itself is designed to take a longer dropper post if required.   Features: Material: Hydroformed 6061-T6 Triple-Butted Aluminium Fork Travel: 170mm Axle to Crown: 582mm Fork Offset: 42mm Rear Travel: 165mm Wheels Size: Front 29”/Rear 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: S/M/L Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Mega V4 297 Alloy, 165mm Travel, custom triple butted hydro-formed tube set Internal cable routing ISCG05 mount Enduro Bearings Threaded 73mm BB Boost 148mm rear axle spacing 3D contoured Rubber frame protection Shock: RockShox Super Deluxe Ultimate RCT, Custom LIN L1 HOTDOG S320 tune, 230x62.5mm, Bearing End, 2 bottomless tokens fitted Headset: Nukeproof, 44-56 IITS Weight: 3.87Kgs/8.53lbs (Medium)
    • Shop: Wiggle DACH
    • Price: 2199.99 EUR excl. shipping
  • Thumbnail
    VIGOR Zündspulen-Abzieher Satz V6741
    Abziehersatz für Zündspulen anVAGundOPEL- MotorenProfessionelles und beschädigungsfreies Demontieren von Zündspulen und Zündspulen-LeistenAufstecken und anschließendes Abziehen ermöglicht ein gleichmäßiges Demontieren des ZündmodulsDie Verwendung wird paarweise empfohlenGrößte Marktabdeckung-Satz bestehend aus:- Abzieher Typ A, 26 mm- Abzieher Typ B, 18 mm- Abzieher Typ C, 43 mm- Abzieher Typ D, 35 mm- 2x Zündmodul-AbzieherAbzieher geeignet für u.a. folgende Fahrzeuge:FürCHEVROLETAveo CruzeOPEL/VAUXHALLAdam ∙ Agila-B ∙ Astra-J ∙ Cascada Combo ∙ Corsa-D ∙ Meriva-B ∙ Mokka ∙ Zafira TourerMotoren: 1,0: A10XEP (LDB), 1,2: A12XEL (LWD) A12XER (LDC), 1,4: A14XEL (L2Z) A14XER (LDD) LDU1,4 (T): A14NEL (LUH) A14NET (LUJ) Twinport / ecoFLEX MotorenOPEL3- bzw. 4-Zylinder Benzin-Einspritzmotoren z.B. beiOPELAgila-A ∙ Astra-F ∙ Astra-G ∙ Astra-H ∙ Astra-J ∙ Calibra Combo ∙ Corsa-B ∙ Corsa-C ∙ Corsa-D ∙ Frontera-A ∙ Frontera-B ∙ Insignia ∙ Meriva-A ∙ Meriva-B Omega-B Signum ∙ Tigra-A ∙ Tigra-B ∙ Vectra-B ∙ Vectra-C ∙ Zafira-A ∙ Zafira-BMotorcodes:20LEH ∙ 2HO ∙ A10XEP ∙ A14NEL ∙ A14NET ∙ A14XER ∙ A16LET ∙ A16XER ∙ A18XER ∙ C22SEL ∙ LDD ∙ LDE ∙ LLU ∙ LUH ∙ LUJ ∙ X14NZ ∙ X14SZ ∙ X14XE ∙ X16SZR ∙ X16XE ∙ X16XEL ∙ X18XE ∙ X20SE ∙ X20XEV ∙ X22SE ∙ X22XE ∙ Y22SE ∙ Z10XEP ∙ Z12XE ∙ Z12XEP ∙ Z14XE ∙ Z14XEL ∙ Z14XEP ∙ Z16LEL ∙ Z16LER ∙ Z16LET ∙ Z16XE ∙ Z16XER ∙ Z16YNG ∙ Z18XE ∙ Z18XER ∙ Z20LERZündklauen:TYP A (26 mm):z.B.VWGolf ∙ Bora ∙ Beetle ∙ Lupo ∙ Passat ∙ Touran ∙ T4,AUDIA2TYP B (18 mm):Bora ∙ Golf ∙ Passat ∙ Sharan ∙ Touareg ∙ Phaeton ∙ T5TYP C (43 mm):8 u. 12 Zyl. Motore wie Phaeton u.a.TYP D (35 mm):DirekteinspritzerVWGolf ∙ Touran ∙ Passat und Eos sowieAUDIA4 und A6
    • Shop: Contorion
    • Price: 59.81 EUR excl. shipping
  • Thumbnail
    Enduro Bearings ABEC3 7902 2RS Max Bearing - Steuersätze
    The ABEC3 7902 2RS Max raises the bar for military standard, high precision bearings. This MAX model was engineered without retainers and 40% more balls than standard ABEC 3 or 5 bearings, enabling them to carry a much higher load and perfect for frame pivots. This bearing is packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last longer than ever before. Technologies: 2RS: Literally means the bearing has Two Rubber Seals. There are many types of seals. On most other bearings 2RS means that the seal is made from rubber and has one sealing lip rubbing on any flat part of the inner race. Enduro’s seals are usually either LLU (usually the MAX type bearings) or LLB (better for hubs). CRC Sta-Plex Marine: This grease will not wash out or break down under any extreme conditions including power washing, salt water intrusion from the salted roads, or even dirt getting into the rolling areas. The High Pressure properties of this grease provides a cushion for the sharp blows that suspension pivots will endure. Tough and Tenacious for high impact and extreme conditions.  
    • Shop: Wiggle DACH
    • Price: 10.00 EUR excl. shipping
  • Thumbnail
    Nukeproof - Mega 275 Carbon Frame - Black - Rahmen - Full Suspension MTB
    ◌ This race-ready full-suspension mountain bike (MTB) frame features an ultra-strong T700/800 monocoque carbon fibre build, which allows you to benefit from its increased stiffness and strength without any weight penalty. Lightweight and responsive, Nukeproof has also kitted out this model with updated geometry for smooth handling, while its internally piped cable routing allows for a sleek, clean finish. Developed for the most demanding of terrain conditions, this version also comes equipped with a Factory Series Fox Float X2 rear shock for increased traction, tuneability and smoothness. Coming complete with 148x12mm Boost rear hub spacing and a range of updated features, this carbon frame is a perfect choice of upgrade for completing your enduro bike build. For over 12 years, Nukeproof's best-selling model; the Mega has been racking up awards on Enduro stages and in the press around the world. With four Enduro World Series titles to its name, the Mega has become an icon that is synonymous with racing. Since 2009 the Nukeproof Mega has been on a constant development to meet the demands of Nukeproof's riders and customers alike. As a result, the Mega Carbon V4 frame is available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel set ups, with each frame design tailored around each wheel size. Carbon Fibre Full-Suspension Enduro MTB Frame To optimise the weight, strength and stiffness, the Mega Carbon frame features a T700/800 UD woven carbon fibre frameset (Front and rear Triangle). The carbon swingarms helps reduce the unsprung weight on the rear of the bike, improving suspension performance. All forged parts are made from 6061-T6 aluminium.  After winning four Enduro World Series Titles in three years the V4 design is an evolution of Nukeproof's ultimate Enduro bike. At the heart of the frame is the brand's revised suspension Kinematic, designed to be more subtle off the top, whilst remaining progressive and predictable. Anti-Squat is used to create an effective pedalling bike that can be thrashed through technical terrain. The useable SAG range is also widened to allow riders to tune the suspension to the trails. Other key features include: ·        All new UD Carbon chassis ·        Improved suspension kinematics  ·        Tube-In-Tube design for easy cable installation  ·        All new geometry   ·        Optimised sizing/fit - Small to XXL ·        SRAM UDH  ·        Room for a 750ml water bottle inside the main front triangle    The updated Mega frame geometry features dynamic saddle offset which is designed to optimise seated rider weight distribution on each frame size. This is achieved through seat angles which are bespoke to each frame size. In addition, the actual seat tube is designed to be shorter overall with a bigger maximum insert depth so as to allow a longer dropper post if required.    Features: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Fork Travel: 170mm Axle to Crown: 562mm Fork Offset: 37mm Rear Travel: 165mm Wheels Size: 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: S/M/L/XL/XXL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Mega V4 275 Carbon, 165mm Travel, ultra-strong monocoque UD Carbon Fibre frame Internally piped cable routing ISCG05 mount Enduro bearings Threaded 73mm BB Boost 148mm rear axle spacing 3D contoured Rubber frame protection Factory fitted clear paint protection kit covering TT/DT/CS/SS. Shock: Fox Float X2, Factory Series, Kashima, EVOL, 2 Position lever, Custom CL, RM, Rezi CM tune, 230x65mm, Bearing End, 2x 0.3 spacer fitted. (SHORT ID: D7JJ) Headset: Nukeproof, 44-56 IITS Weight: 3.88Kgs/8.55lbs (Tubeless)
    • Shop: Wiggle DACH
    • Price: 2999.99 EUR excl. shipping
  • Thumbnail
    Nukeproof - Mega 275 Carbon Frame - Black - Rahmen - Full Suspension MTB
    ◌ This race-ready full-suspension mountain bike (MTB) frame features an ultra-strong T700/800 monocoque carbon fibre build, which allows you to benefit from its increased stiffness and strength without any weight penalty. Lightweight and responsive, Nukeproof has also kitted out this model with updated geometry for smooth handling, while its internally piped cable routing allows for a sleek, clean finish. Developed for the most demanding of terrain conditions, this version also comes equipped with a Factory Series Fox Float X2 rear shock for increased traction, tuneability and smoothness. Coming complete with 148x12mm Boost rear hub spacing and a range of updated features, this carbon frame is a perfect choice of upgrade for completing your enduro bike build. For over 12 years, Nukeproof's best-selling model; the Mega has been racking up awards on Enduro stages and in the press around the world. With four Enduro World Series titles to its name, the Mega has become an icon that is synonymous with racing. Since 2009 the Nukeproof Mega has been on a constant development to meet the demands of Nukeproof's riders and customers alike. As a result, the Mega Carbon V4 frame is available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel set ups, with each frame design tailored around each wheel size. Carbon Fibre Full-Suspension Enduro MTB Frame To optimise the weight, strength and stiffness, the Mega Carbon frame features a T700/800 UD woven carbon fibre frameset (Front and rear Triangle). The carbon swingarms helps reduce the unsprung weight on the rear of the bike, improving suspension performance. All forged parts are made from 6061-T6 aluminium.  After winning four Enduro World Series Titles in three years the V4 design is an evolution of Nukeproof's ultimate Enduro bike. At the heart of the frame is the brand's revised suspension Kinematic, designed to be more subtle off the top, whilst remaining progressive and predictable. Anti-Squat is used to create an effective pedalling bike that can be thrashed through technical terrain. The useable SAG range is also widened to allow riders to tune the suspension to the trails. Other key features include: ·        All new UD Carbon chassis ·        Improved suspension kinematics  ·        Tube-In-Tube design for easy cable installation  ·        All new geometry   ·        Optimised sizing/fit - Small to XXL ·        SRAM UDH  ·        Room for a 750ml water bottle inside the main front triangle    The updated Mega frame geometry features dynamic saddle offset which is designed to optimise seated rider weight distribution on each frame size. This is achieved through seat angles which are bespoke to each frame size. In addition, the actual seat tube is designed to be shorter overall with a bigger maximum insert depth so as to allow a longer dropper post if required.    Features: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Fork Travel: 170mm Axle to Crown: 562mm Fork Offset: 37mm Rear Travel: 165mm Wheels Size: 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: S/M/L/XL/XXL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Mega V4 275 Carbon, 165mm Travel, ultra-strong monocoque UD Carbon Fibre frame Internally piped cable routing ISCG05 mount Enduro bearings Threaded 73mm BB Boost 148mm rear axle spacing 3D contoured Rubber frame protection Factory fitted clear paint protection kit covering TT/DT/CS/SS. Shock: Fox Float X2, Factory Series, Kashima, EVOL, 2 Position lever, Custom CL, RM, Rezi CM tune, 230x65mm, Bearing End, 2x 0.3 spacer fitted. (SHORT ID: D7JJ) Headset: Nukeproof, 44-56 IITS Weight: 3.88Kgs/8.55lbs (Tubeless)
    • Shop: Wiggle DACH
    • Price: 2999.99 EUR excl. shipping
  • Thumbnail
    Nukeproof - Mega 275 Carbon Frame - Black - Rahmen - Full Suspension MTB
    ◌ This race-ready full-suspension mountain bike (MTB) frame features an ultra-strong T700/800 monocoque carbon fibre build, which allows you to benefit from its increased stiffness and strength without any weight penalty. Lightweight and responsive, Nukeproof has also kitted out this model with updated geometry for smooth handling, while its internally piped cable routing allows for a sleek, clean finish. Developed for the most demanding of terrain conditions, this version also comes equipped with a Factory Series Fox Float X2 rear shock for increased traction, tuneability and smoothness. Coming complete with 148x12mm Boost rear hub spacing and a range of updated features, this carbon frame is a perfect choice of upgrade for completing your enduro bike build. For over 12 years, Nukeproof's best-selling model; the Mega has been racking up awards on Enduro stages and in the press around the world. With four Enduro World Series titles to its name, the Mega has become an icon that is synonymous with racing. Since 2009 the Nukeproof Mega has been on a constant development to meet the demands of Nukeproof's riders and customers alike. As a result, the Mega Carbon V4 frame is available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel set ups, with each frame design tailored around each wheel size. Carbon Fibre Full-Suspension Enduro MTB Frame To optimise the weight, strength and stiffness, the Mega Carbon frame features a T700/800 UD woven carbon fibre frameset (Front and rear Triangle). The carbon swingarms helps reduce the unsprung weight on the rear of the bike, improving suspension performance. All forged parts are made from 6061-T6 aluminium.  After winning four Enduro World Series Titles in three years the V4 design is an evolution of Nukeproof's ultimate Enduro bike. At the heart of the frame is the brand's revised suspension Kinematic, designed to be more subtle off the top, whilst remaining progressive and predictable. Anti-Squat is used to create an effective pedalling bike that can be thrashed through technical terrain. The useable SAG range is also widened to allow riders to tune the suspension to the trails. Other key features include: ·        All new UD Carbon chassis ·        Improved suspension kinematics  ·        Tube-In-Tube design for easy cable installation  ·        All new geometry   ·        Optimised sizing/fit - Small to XXL ·        SRAM UDH  ·        Room for a 750ml water bottle inside the main front triangle    The updated Mega frame geometry features dynamic saddle offset which is designed to optimise seated rider weight distribution on each frame size. This is achieved through seat angles which are bespoke to each frame size. In addition, the actual seat tube is designed to be shorter overall with a bigger maximum insert depth so as to allow a longer dropper post if required.    Features: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Fork Travel: 170mm Axle to Crown: 562mm Fork Offset: 37mm Rear Travel: 165mm Wheels Size: 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: S/M/L/XL/XXL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Mega V4 275 Carbon, 165mm Travel, ultra-strong monocoque UD Carbon Fibre frame Internally piped cable routing ISCG05 mount Enduro bearings Threaded 73mm BB Boost 148mm rear axle spacing 3D contoured Rubber frame protection Factory fitted clear paint protection kit covering TT/DT/CS/SS. Shock: Fox Float X2, Factory Series, Kashima, EVOL, 2 Position lever, Custom CL, RM, Rezi CM tune, 230x65mm, Bearing End, 2x 0.3 spacer fitted. (SHORT ID: D7JJ) Headset: Nukeproof, 44-56 IITS Weight: 3.88Kgs/8.55lbs (Tubeless)
    • Shop: Wiggle DACH
    • Price: 2999.99 EUR excl. shipping

Similar searches: