116 Results for : voltages
-
LM 319 M - Komparator, 2-fach, SO-14
The LM119 series are precision high-speed dual comparators fabricated on a single monolithic chip. They are designed to operate over a wide range of supply voltages down to a single 5-V logic supply and ground. They have higher gain and lower input currents than devices such as the LM710. The uncommitted collector of the output stage makes the LM119 compatible with RTL, DTL, and TTL, as well as capable of driving lamps and relays at currents of up to 25 mA.- Shop: reichelt elektronik
- Price: 1.78 EUR excl. shipping
-
INA 214 AIDCKT - Current-Shunt-Monitor, 1-fach, 100 V/V, 0,4 V/µs, 30 kHz, SC-70-
The INA210, INA211, INA212, INA213, INA214, and INA215 are voltage-output, current-shunt monitors that can sense drops across shunts at common-mode voltages from -0.3 V to 26 V, independent of the supply voltage. Five fixed gains are available: 50 V/V, 75 V/V, 100 V/V, 200 V/V, 500 V/V, or 1000 V/V. The low offset of the zero-drift architecture enables current sensing with maximum drops across the shunt as low as 10-mV full-scale.- Shop: reichelt elektronik
- Price: 1.90 EUR excl. shipping
-
LM 358 PE3 - Operationsverstärker, 2-fach, DIP-8
These devices consist of two independent, high-gain frequency-compensated operational amplifiers designed to operate from a single supply over a wide range of voltages. Operation from split supplies also is possible if the difference between the two supplies is 3 V to 32 V (3 V to 26 V for the LM2904), and VCC is at least 1.5 V more positive than the input common-mode voltage. The low supply-current drain is independent of the magnitude of the supply voltage.- Shop: reichelt elektronik
- Price: 0.45 EUR excl. shipping
-
TL 331 IDBVR - Komparator, 1-fach, SOT-23-5
This device consists of a single voltage comparator that is designed to operate from a single power supply over a wide range of voltages. Operation from dual supplies also is possible if the difference between the two supplies is 2 V to 36 V and V CC is at least 1.5 V more positive than the input common-mode voltage. Current drain is independent of the supply voltage. The output can be connected to other open-collector outputs to achieve wired-AND relationships.- Shop: reichelt elektronik
- Price: 0.55 EUR excl. shipping
-
LM 2903 D - Komparator, 2-fach, SO-8
These devices consist of two independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages. Operation from dual supplies also is possible as long as the difference between the two supplies is 2 V to 36 V, and V CC is at least 1.5 V more positive than the input common-mode voltage. Current drain is independent of the supply voltage. The outputs can be connected to other open-collector outputs to achieve wired-AND relationships.- Shop: reichelt elektronik
- Price: 0.30 EUR excl. shipping
-
LM 324 MX - Operationsverstärker, 4-fach, SO-14
These devices consist of four independent high-gain frequency-compensated operational amplifiers that are designed specifically to operate from a single supply over a wide range of voltages. Operation from split supplies also is possible if the difference between the two supplies is 3 V to 32 V (3 V to 26 V for the LM2902), and VCC is at least 1.5 V more positive than the input common-mode voltage. The low supply-current drain is independent of the magnitude of the supply voltage.- Shop: reichelt elektronik
- Price: 1.24 EUR excl. shipping
-
LM 393 AD - Komparator, 2-fach, SO-8
These devices consist of two independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages. Operation from dual supplies also is possible as long as the difference between the two supplies is 2 V to 36 V, and VCC is at least 1.5 V more positive than the input common-mode voltage. Current drain is independent of the supply voltage. The outputs can be connected to other open-collector outputs to achieve wired-AND relationships.- Shop: reichelt elektronik
- Price: 0.90 EUR excl. shipping
-
LM 393 P - Komparator, 2-fach, PDIP-8
These devices consist of two independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages. Operation from dual supplies also is possible as long as the difference between the two supplies is 2 V to 36 V, and VCC is at least 1.5 V more positive than the input common-mode voltage. Current drain is independent of the supply voltage. The outputs can be connected to other open-collector outputs to achieve wired-AND relationships.- Shop: reichelt elektronik
- Price: 0.32 EUR excl. shipping
-
LM 393 PWRG4 - Komparator, 2-fach, TSSOP-8
These devices consist of two independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages. Operation from dual supplies also is possible as long as the difference between the two supplies is 2 V to 36 V, and VCC is at least 1.5 V more positive than the input common-mode voltage. Current drain is independent of the supply voltage. The outputs can be connected to other open-collector outputs to achieve wired-AND relationships.- Shop: reichelt elektronik
- Price: 0.25 EUR excl. shipping
-
LM 2903 P - Komparator, 2-fach, PDIP-8
These devices consist of two independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages. Operation from dual supplies also is possible as long as the difference between the two supplies is 2 V to 36 V, and V CC is at least 1.5 V more positive than the input common-mode voltage. Current drain is independent of the supply voltage. The outputs can be connected to other open-collector outputs to achieve wired-AND relationships.- Shop: reichelt elektronik
- Price: 0.42 EUR excl. shipping